第五章 投標邀請
Section 5．Invitation for Bids
招標項目
Project Name: JZ23-2 OIL FIELD DEVELOPMENT PROJECT For CRUDE OIL EXPORT PUMP SKID
招標編號（Bid No.）：0704-2340JDCP0203/01
日 期：2023年2月16日
Date : Feb.16th, 2023
中化建國際 （以下稱為“招標代理機構”）受中海石油（中國） （以下稱為“招標人”）委托，就錦州23-2油田開發項目所需部分貨物及相關服務進行國際公開招標。現邀請投標人對下列貨物和服務提交密封投標：
CNCCC International Tendering Co., Ltd. (hereinafter referred to as “the Tendering Agent”), entrusted by CNOOC China Limited (hereinafter referred to as “Tenderee” ), intends to purchase the Goods and the relevant services required under the project of JZ23-2 OIL FIELD DEVELOPMENT by International Competitive Bidding. Bidders are kindly requested to provide the following Goods and services with sealed bids.
1. 招標條件
Bidding Conditions：
項目概況：錦州23-2油田開發推薦方案擬新建2座8腿熱采中心平臺JZ23-2 CEPA和JZ23-2 CEPB，設置80人生活樓和180修井機， JZ23-2 CEPA和JZ23-2 CEPB之間通過2km的海管和海纜連接。熱采井流物在JZ23-2CEPA和JZ23-2CEPB處理成部分含水原油后，在JZ23-2CEPB匯集經新建JZ23-2CEPB至JZ9-3CEPD海底管道 油田依托錦州9-3油田聯網供電，并在JZ23-2CEPB平臺增設2臺原油電站補充電力不足。
Project Summary：It is proposed to build two eight-leg thermal production center platforms JZ23-2 CEPA and JZ23-2 CEPB, set up 80 people living buildings and 180 workover RIGS. JZ23-2 CEPA and JZ23-2 CEPB are connected by 2km sea pipe and sea cable. After being processed into partially water-bearing crude oil by JZ23-2CEPA and JZ23-2CEPB, the flow from thermal recovery Wells is collected by JZ23-2CEPB and sent to JZ9-3CEPD for qualified crude oil treatment through the newly built submarine pipeline from JZ23-2CEPB to JZ9-3CEPD, and then sent to JZ9-3 oil storage caisson for storage and transportation. The oilfield relies on Jinzhou 9-3 oilfield for networked power supply, and two additional crude power stations are added on JZ23-2CEPB platform to supplement the power shortage.
資金到位或資金來源落實情況：已落實。
Source of Funds: yes
項目已具備招標條件的說明：已具備。
Description of Prepared Bidding Conditions: yes
2. 招標內容：Bidding Contents:
貨物
Name of Goods: CRUDE OIL EXPORT PUMP SKID
數量：6臺套
Quantity: 6 Sets
主要技術規格：
CEPA-X-2004A/B/C 3臺套 (流量：79m3/h，入口壓力：400kPaG，排出壓力：6900kPaG)
CEPB-X-2004A/B/C 3臺套 (流量：79m3/h，入口壓力：400kPaG，排出壓力：5100kPaG)
Main Specifications:
CEPA-X-2004A/B/C 3 Sets (Displacement:79m3/h，Input Pressure:400kPaG，Output Pressure:6900kPaG)
CEPB-X-2004A/B/C 3 Sets (Displacement:79m3/h，Input Pressure:400kPaG，Output Pressure:5100kPaG)
交貨期：
Delivery Schedule:
從中華人民共和國關境內提供的貨物：2023年10月20日前（貨到項目現場時間）
For goods offered from within PRC customs territory: before Oct. 20th,2023 (arrival date to the job site)
從中華人民共和國關境外提供的貨物:2023年10月6日前（到港時間）
For goods offered from outside PRC customs territory: before Oct. 6th,2023 (Estimated Time of Arrival)
交貨地點Destination of delivery:
從中華人民共和國關境內提供的貨物：山東青島
For goods offered from within PRC customs territory: Tanggu,Tianjin
從中華人民共和國關境外提供的貨物：DAP青島港
For goods offered from outside PRC customs territory: DAP Tianjin port
3. 對投標人的資格和業績要求：
Requirements for Qualification and reference of Bidder:
（1）資格要求
Requirements for Qualification of Bidder
A．如果投標人為境內注冊公司，投標人需提供合法有效的企業法人營業執照、稅務登記證及組織機構代碼證或證照合一的營業執照；
如果投標人為境外注冊公司，需提供有效的公司登記注冊證明；
窗體頂端
窗體底端
A．The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license;
The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.
B．（不接受代理）
投標人應為所投貨物的制造商。本次招標不接受代理商投標。
B. The bidder shall be the manufacturer of bid goods. Bid by Agent is not accepted.
C. 是否接受聯合體投標：否
Joint Venture: Not Accepted
D.未領購招標文件是否可以參加投標:不可以
Bid without the bidding documents：NOT Available
E. 其它
others:
（2）資質要求及證明文件
Requirements of Qualification of Bidder and Certificate
A. 其他
others
（3）業績要求Requirement for Bidder's reference:
★ 離心泵橇塊需按照《海上固定平臺安全規則》的要求進行設計、制造、認證和檢驗。投標人應委托國家安全生產監督管理總局海洋石油作業安全辦公室（COOOSO）認可的船級社（ABS，DNV，CCS，BV）對離心泵設備整體進行檢驗并獲得檢驗證書。
The Centrifugal Pump Skid shall be designed, manufactured, certified and tested in accordance with the requirements of Safety Rules for Offshore Fixed Platform Issued by State Economic & Trade Commission. PRC (SETC). Supplier shall at his own cost arrange inspection and obtain inspection compliance certificate of Centrifugal Pump Skids from one of the certifying agencies authorized by COOOSO, which are ABS, DNV,CCS, BV.
★ 自2012年1月1日起至投標截止日（以合同簽訂時間為準），投標人所投產品的制造商應具有至少2臺原油外輸泵（流量≥79m3/h，揚程≥500m，BB3泵型）的供貨業績，并提交相關業績證明文件；
投標人須按規定格式提交業績表，業績證明文件包括但不限于：銷售合同原件掃描件和到貨驗收證明文件。業績證明文件按至少體現以下內容：合同首頁、簽字蓋章頁、合同簽署時間、貨物名稱、技術參數、供貨數量，到貨驗收證明文件。未提供以上文件或提供文件無法滿足上述要求的視為無效業績。。
The bidding products that meet the requirements of this project ( capacity ≥79 m3/h，head≥500m，BB3，Medium is cruel oil) should have two or more sets of application performance within ten years and have a good record of stable operation ; The bidder shall submit the performance table in the prescribed format and submit relevant performance certification documents. Performance certification documents include but are not limited to: Copies of sales contract (including relevant technical attachments); The arrival acceptance certificate materials signed and sealed by the user
The supporting documents submitted by the bidder must at least show the following contents: name of goods, quantity to be supplied, the main parameters of centrifugal crude oil pump（capacity,head,type,Medium）. If the performance certification documents are not submitted, or the performance certification documents provided cannot verify the above contents, the performance shall be regarded as invalid.
4. 有興趣的投標人可通過以下方式獲取招標文件：從2023年2月16日開始至2023年2月23日止，請登錄中國海油采辦業務管理與交易系統(https://buy.cnooc.com.cn）的招標公告頁面進行購買。首次登錄必須先進行注冊（免費），注冊成功后，方可 投標人須在線填寫 招標文件每套售價為200元人民幣或30美元，售后不退。對于使用美元
The interested Bidders may obtain the bidding document by following method: Please login at CNOOC Procurement Operation System on the page of Invitation for bid for purchasing Bidding document from Feb.16th, 2023 to Feb.23th, 2023 For the first time of login, a registration (free of charge) is needed and only after successful registration, Bidder can purchase Bidding documents online.The bidder shall fill in the registration form for purchasing bidding documents online and pay online. After successful payment, the bidder can download the bidding documents by itself. The price of each set of bidding documents is RMB200 or USD30, and it is non refundable after sales. For the bidder who purchases the bidding documents in US dollars, it is required to wire transfer to the following account number:
Payee: CNCCC International Tendering Co., Ltd.
Bank:I NDUSTRIAL AND COMMERCIAL BANK OF CHINA,Beijing National Cultural and Financial Cooperation Demonstration Zone Jinjie Sub-branch：
Account:0200000709117000351;
SWIFT CODE: ICBKCNBJBJM，
Bank Address:No. 237 Wang fu jing Street, Dongcheng District, Beijing, China PR,100006.
5. 投標文件的遞交 Submission of bid
投標截止時間（開標時間）： 2023年3月9日上午9點
The deadline for submission of bid (bid opening time):9:00(Beijing time) on Mar.9th , 2023
投標文件送達
Any bid beyond the required time and date shall be subject for rejection.
6. 本次招標公告同時在機電產品招標投標 （ cbjywebframeup/bigfiledown.jsp?foldGuid=47e0e28e-4e24-404a-bc79-8b7824eefb61&contentType=pdf&filePath=%257E%252FAttachStorage%252F202302%252FPBBF001%252Fcad37573-a79c-4710-b12e-34447801e466%252F47e0e28e-4e24-404a-bc79-8b7824eefb61.pdf&fileName=%25E6%2596%2587%25E6%25A1%25A31.pdf" title="文檔1.pdf">文檔1.pdf